Section 05 TRANSMISSION
Subsection 08 (GEARBOX)
REMOVAL
Drain gearbox oil.
1. Bottom pan drain hole nearby gearbox drain plug
Remove belt guard, drive belt. Remove air silencer
and carburetor(s); then remove driven pulley.
Remove brake caliper, brake disc. Unfasten shift-
ing rod and unplug reverse switch.
A29D0MA
05-08-2
Remove rear suspension.
Remove angle drive and square pin from bottom of
gearbox.
Remove muffler. Unbolt RH end bearing then pull
drive axle toward right side.
1. RH end bearing
Unbolt gearbox from chassis.
MMR2004-128_05_08A.FM