Installation - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

Install step collar no. 10 with its sleeve first. Lubri-
cate a new O-ring no. 11 and locking element no. 9
with Molykote PG 54 (P/N 420 899 763). Install
over pawl lock.
1. Step collar
2. O-ring
3. Locking element
Position a new push nut no. 13.

INSTALLATION

Fan Cooled Models Only
Reinstall oil pump on rewind starter assembly.
All Models
Thread starter rope no. 6 through rope guide when
applicable.
A03C0VA
TYPICAL
MMR2004-119_04_10A.FM
Subsection 10 (REWIND STARTER)
Reinstall rewind starter assembly on engine.
Prior to installing starter grip no. 15 on new rope,
it is first necessary to fuse the rope end with a lit
match. Pass rope through starter grip and tie a
knot in the rope end. Fuse the knot with a lit match
then insert rope end down and pull the starter grip
over the knot.
A01C18A
TYPICAL
Section 04 ENGINE
04-10-7