Section 08 STEERING/FRONT SUSPENSION
Subsection 03 (SUSPENSION AND SKI SYSTEM)
INSTALLATION
For assembly, reverse the disassembly procedure.
However, pay attention to the following.
Apply suspension synthetic grease (P/N 293 550
033) to ski leg components.
Install steering stopper no. 6 as per following photo.
TYPICAL
1. Steering stopper
Longer bolts for shock and swing arm go on upper
attachments.
Tighten nuts and screws to proper torque as men-
tioned in exploded view.
08-03-10
7,8, Upper and Lower Arms
Position arms and tie rods horizontally before tight-
ening nuts.
Bent portion of lower arm no. 6 must face down.
Steering arm must be installed parallel to ski.
1. Parallel
MMR2004-141_08_03A.FM