Pulley Alignment And Distance Specifications Chart - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

PULLEY ALIGNMENT AND DISTANCE SPECIFICATIONS CHART

MODELS
TUNDRA
SKANDIC LT/LT E
SKANDIC WT/SWT/
SUV 550
SKANDIC WT LC/SUV 600
➀ Alignment bars have been made according to pulley alignment mean values. However, they do not
take into account allowed tolerances for alignment specifications. They are used as GO/NOGO gauges
for quick alignment and pulley distance check and as reference to reach alignment nominal values.
Pulley Distance Adjustment Method
Tundra
1. Driven pulley movement
2. Engine movement
CAUTION: The rear suspension must be mount-
ed on the vehicle and track tension and align-
ment must be done to provide the right frame
width.
Loosen the 4 chaincase retaining bolts, unlock and
raise pulley support.
MMR2004-125_05_05A.FM
Subsection 05 (PULLEY DISTANCE AND ALIGNMENT)
PULLEY
DISTANCE
Z
37.0 ± 0.50 mm 36.0 ± 0.50 mm
(1.457 ± .020 in) (1.417 ± .020 in)
39.0 + 0 - 1.0 mm 37.0 ± 0.75 mm
(1.535 + 0 - .039 in) (1.457 ± .030 in)
41.8 + 0 - 1.0 mm 35.0 ± 0.75 mm
(1.645 + 0 - .039 in) (1.380 ± .030 in)
35.5 + 0 - 1.0 mm 37.0 ± 0.50 mm
(1.400 + 0 - .039 in) (1.456 ± .020 in)
Section 05 TRANSMISSION
OFFSET
X Y-X
0 to 1.5 mm
(0 to .060 in)
0.75 to 1.5 mm
(.030 to .060 in)
0.75 to 2.25mm
(.030 to .086 in)
0.75 to 2.25 mm
(.030 to .086 in)
Move chaincase to obtain specific adjustment and
adjust driven pulley support length accordingly
(light contact).
1
A05D0PA
1
Step : Push and hold
2
Step : Raise support
ALIGNMENT
BAR
➀
P/N
529 026 900
529 035 808
529 035 974
529 035 545
2
05-05-3