Disassembly - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

DISASSEMBLY

For the following procedure, right hand side refers
to driven pulley side and left hand side to brake
disc side.
1. RH side driven pulley side
2. LH side brake disc side
Remove dipstick no. 17. Unfasten cover no. 2
from gearbox housing.
Remove nut no. 3 retaining pin no. 6.
1. Cover
2. Nut
MMR2004-128_05_08A.FM
Section 05 TRANSMISSION
Subsection 08 (GEARBOX)
Unfasten sleeve nuts no. 4, remove spring no. 7
then, partially pull shaft no. 5 and remove pin
no. 6.
1. Pin
Completely remove shaft no. 5.
Drill a 10 mm (3/8 in) diameter hole through all plugs
no. 8.
Remove all plugs no. 8 from gearbox.
05-08-3