Section 05 TRANSMISSION
Subsection 04 (DRIVEN PULLEY)
TYPICAL
1. Spacer
2. Shoulder on this side
Should installation procedure be required, refer to
BRAKE then look for BRAKE DISC and COUNTER-
SHAFT BEARING ADJUSTMENT.
Reinstall the pulley on the countershaft by revers-
ing the removal procedure.
14, Pulley Retaining Screw
Torque to 25 N•m (18 lbf•ft).
ADJUSTMENT
Pulley Alignment and Drive Belt
Deflection
Refer to PULLEY DISTANCE AND ALIGNMENT and
DRIVE BELT to perform adjustments.
CAUTION: Drive belt and pulley adjustments
must always be checked whenever pulleys
have been removed, replaced or disassembled.
05-04-11
MMR2004-124_05_04A.FM