Section 04 ENGINE
Subsection 04 (593 ENGINE TYPE)
Screw all crankcase bolts in place in the following
sequence and to the appropriate torque through a
two steps torquing: first, screw bolts up to 60%
of the final torque (18 N•m (13.5 lbf•ft) for most
of the bolts), then, tighten to the required torque
(i.e. 29 N•m (21 lbf•ft)).
A. Torque bolts 1 through 16 to 29 N•m (21 lbf•ft)
B. Torque bolts 17 through 21 to 9 N•m (80 lbf•in)
BREAK-IN
After rebuilding an engine always observe a break-
in period as described in Operator's Guide.
04-04-18
MMR2004-113_04_04A.FM