Brake Fluid Type; Brake Pads Replacement - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

Section 05 TRANSMISSION
Subsection 06 (BRAKE)

BRAKE FLUID TYPE

Use recommended brake fluid SRF (DOT 4) (P/N 293
600 063) or GTLMA (DOT 4) (P/N 293 600 062).

BRAKE PADS REPLACEMENT

Models with Mechanical Brake
Brake pads must be replaced when fixed pad
projects only 1 mm (1/32 in) from caliper.
CAUTION: Brake pads must always be replaced
in pairs.
TYPICAL
1. Fixed pad
2. Inner caliper
A. 1 mm (1/32 in) minimum
Removal
Pull pin no. 16 out of caliper and remove lever
no. 15.
Fixed pad is riveted to chaincase on these models.
Caliper must be split to remove moving pad. To
remove fixed pad, drill out its rivet no. 2 then pry
disc in order to free fixed pad.
Installation
Reverse removal procedure.
All Models with Hydraulic Brake
Brake pads must be replaced when lining is 1 mm
(1/32 in) thick or less.
CAUTION: Brake pads must always be replaced
in pairs.
05-06-4
A. 1 mm (1/32 in) minimum
Removal
Brake pads removal procedure is as follows:
– Remove 2 retainers from the pins.
– Pull out 2 pins which releases the spring.
– Remove the brake pads.
TYPICAL
1. Retainer
2. Spring
3. Pin
TYPICAL
1. Brake pad
MMR2004-126_05_06A.FM