Buzzer Testing; Mpem Connectors - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

Section 06 ELECTRICAL
Subsection 06 (TESTING PROCEDURE)

BUZZER TESTING

Using jumper wires, connect battery positive post
to buzzer positive tab.
Connect battery negative post to buzzer negative
tab.
CAUTION: To avoid buzzer damage, ensure that
polarity is respected.
A03E21A
12-VOLT BATTERY PLUGGED TO BUZZER
06-06-16

MPEM CONNECTORS

To ease electrical readings on MPEM connectors,
connector cap must be removed.
Hold connector in hands then lift both tabs to re-
move connector cap.
A05E0GA
LIFT TABS TO REMOVE CAP
Insert multimeter probes into connector.
A05E0LA
TEST USING MULTIMETER PROBES
MMR2004-134_06_06A.FM