Oil Type; Oil System Leak Test; Oil Pump Identification; Cleaning - BOMBARDIER ski-doo Tundra Scandic 2004 Series Shop Manual

WARNING
Wipe off any oil spills. Oil is highly flammable.

OIL TYPE

All Models
Use recommended injection oil as per vehicle Op-
erator's Guide.

OIL SYSTEM LEAK TEST

All Models
The following test will indicate any leak from oil
reservoir to the banjo fitting(s).
Install on oil reservoir special cap of leak testing kit
(P/N 529 033 100).
Install hose pinchers (P/N 295 000 076) on outlet
hoses.
TYPICAL
1. Special cap on reservoir
2. Hose pinchers on outlet hoses
Connect leak testing kit pump to special cap.
Pressurize oil system to 21 kPa (3 PSI). Pressure
must not drop during 3 minutes.
If pressure drops, locate leak(s) and repair/replace
leaking component(s).

OIL PUMP IDENTIFICATION

All Models
4, Pump Lever
Different engines need different pumps. See iden-
tification on lever no. 4.
MMR2004-116_04_07A.FM
Subsection 07 (OIL INJECTION SYSTEM)
CAUTION: Always mount proper pump on en-
gine.
ENGINE TYPE
277
443
552
593
NOTE: The following procedures can be done with-
out removing the engine from chassis.

CLEANING

Clean all metal components in a non-ferrous metal
cleaner.

DISASSEMBLY

NOTE: Some oil pump components are not avail-
able as single parts.
5,6, Gear Retaining Nut and Oil Pump
Gear
To remove gear retaining nut, first extract the nee-
dle roller with pliers then lock gear in place using
the following gear holder.
ENGINE TYPE
277/443/552
A10C01A
Section 04 ENGINE
OIL PUMP
IDENTIFICATION
132K
E8
03
L7
TOOL P/N
420 876 695
420 876 695
04-07-5