Nestor And Nestor Probe Mode - R&S TSMA6 User Manual

®
R&S TSMA6
Figure 6-5: Scanner ready
For more details about the QualiPoc configuration and usage, refer to the user docu-
mentation of QualiPoc
6.4.1.4

NESTOR and NESTOR probe mode

The NESTOR mode is only displayed if the NESTOR software is installed (see
ter 8.6.2, "R&S NESTOR
General
●
NESTOR mode
The NESTOR UI engine and the NESTOR measurement engine are hosted on the
R&S TSMA6.
●
NESTOR probe mode
The R&S TSMA6 hosts only the NESTOR measurement engine. The NESTOR UI
engine is hosted on a remote PC connected via LAN/WLAN with the R&S TSMA6.
This master PC is required to control the measurement.
Prerequisites
●
For NESTOR and NESTOR probe mode:
–
●
For NESTOR mode only:
–
–
●
For NESTOR probe mode only:
–
–
–
User Manual 4900.8057.02 ─ 11
®
.
software",
NESTOR option licenses are either installed on the internal SD card or connec-
ted as an external USB dongle
NESTOR workspace file imported (see
on page 55
NESTOR license dongle connected to a USB port
WAN / LAN connection with the NESTOR host (see
ing to LAN/WAN from a remote
NESTOR Probe mode requires a master PC to control the measurement
Optional: NESTOR license dongle connected to a USB port
Configuring the R&S TSMA6
Selecting measurement mode
on page 106).
"Import NESTOR workspace file"
PC", on page 28)
Chap-
Chapter 3.1.10, "Connect-
52