Nestor And Nestor Probe Mode - R&S TSMA6 Getting Started

®
R&S TSMA6
Figure 6-5: Scanner ready
For more details about the QualiPoc configuration and usage, refer to the user
documentation for QualiPoc
6.3.4

NESTOR and NESTOR Probe Mode

The NESTOR mode is only displayed if the NESTOR setup has been exe-
cuted (see R&S TSMA6 user manual).
General
● NESTOR Mode
The NESTOR UI engine and the NESTOR measurement engine are hosted
on the R&S TSMA6.
● NESTOR Probe Mode
The R&S TSMA6 hosts only the NESTOR measurement engine. The NES-
TOR UI engine is hosted on a remote PC connected via LAN/WLAN with the
R&S TSMA6.
Prerequisites
● For NESTOR and NESTOR Probe mode:
– NESTOR option licenses either installed on the internal SD card or con-
nected as an external USB dongle
● For NESTOR mode only:
– NESTOR workspace file imported (see
on page 41
● For NESTOR Probe mode only:
Getting Started 4900.8040.02 ─ 07
®
.
Configuring the R&S TSMA6
Measurement Modes
"Import NESTOR workspace file"
36