Measurement Modes; Pc Mode; Remote Vicom Server Mode - R&S TSMA6 User Manual

®
R&S TSMA6
Measurement modes are only selectable, if the appropriate SW applications are instal-
led (see
always selectable.

6.4.1 Measurement modes

6.4.1.1

PC mode

The "PC Mode" is the standard mode for installation of software and for the interactive
operation of the R&S TSMA6.
In this mode, no software application (NESTOR, SmartONE, QualiPoc) is started in the
background.
6.4.1.2

Remote ViCom server mode

The "rVicom Server" mode selector is only displayed if the R&S Remote ViCom server
software is installed (see
User Manual 4900.8057.02 ─ 11
Chapter 8.6, "Software update -
Chapter 6.4.1.2, "Remote ViCom server
Configuring the R&S TSMA6
Selecting measurement mode
details", on page 102). The " PC Mode" is
mode", on page 48).
48