®
R&S
TSMA6
6.1.2
Establish a Remote Desktop Connection
To establish a remote desktop connection, the following steps must be performed:
1. Establish a WLAN/LAN connection between the R&S TSMA6 and the remote
PC (see
Chapter 6.1.1, "Start the R&S TSMA6 Web
2. On the external Windows PC, navigate to "Programs" > "Accessories" >
"Remote Desktop Connection".
3. In the "Remote Desktop Connection" window, click "Options".
4. In the "General" tab, enter following parameters:
● Computer: The input depends on selected connection type (see the
ter 6.1.1, "Start the R&S TSMA6 Web
– WLAN: 192.168.137.1
– LAN: IP address of the R&S TSMA6
NOTE:
If you connect the R&S TSMA6 LAN interface with a PC via LAN cable,
the IP addresses are negotiated automatically by default. No fixed IP
addresses are assigned. In this case, you can add the device name in
the "LAN" field. This solution requires a working DNS service.
● User name: instrument
5. Click "Connect".
Getting Started 4900.8040.02 ─ 07
Configuring the R&S TSMA6
Accessing the R&S TSMA6
GUI",
GUI",
on page 28) and is as follows.
on page 28).
Chap-
30