Using Wlan From A Remote Pc Or Smartphone; Using A Remote Desktop Connection - R&S TSMA6 User Manual

®
R&S TSMA6
The R&S TSMA6 web GUI opens automatically. If not, type the following URL:
http://localhost
6.1.1.2

Using WLAN from a remote PC or smartphone

1. On the remote device, search for the TSMA6 WLAN network. The WLAN access
point on the R&S TSMA6 starts automatically by factory default.
NOTE: WLAN AP start-up configuration (see
on page 163).
2. Connect to the access point using the login credentials found at the bottom label of
the R&S TSMA6.
Default SSID: TSMA6-xxxxxx (xxxxxx is the serial number of this specific R&S
TSMA6)
Default key: instrument
Note:
The SSID and the key are configurable via the web GUI (see
"WLAN
3. Open the browser in the remote device and enter the IP address of the TSMA6
web GUI.
http://192.168.137.1/
The TSMA6 web-GUI is displayed on the browser.

6.1.2 Using a remote desktop connection

To establish a remote desktop connection with a Windows PC (Win10 is recommen-
ded), the following steps have to be performed.
1. Establish a WLAN/LAN connection between the R&S TSMA6 and the remote PC
(see
2. On the keyboard, press [Win-Logo] + [R].
The command window opens.
3. Enter mstsc.exe.
The "Remote Desktop Connection" window opens.
4. In the "Remote Desktop Connection" window, click "Show Options".
5. In the "General" tab, enter following parameters:
●
User Manual 4900.8057.02 ─ 11
AP", on page 163).
Chapter 6.1.1, "Using the R&S TSMA6 web
Computer: The input depends on the selected connection type and is as fol-
lows.
– WLAN: 192.168.137.1
– LAN: IP address of the R&S TSMA6
NOTE:
Configuring the R&S TSMA6
Accessing the R&S TSMA6
Chapter A.2.2.3, "WLAN
Chapter A.2.2.3,
GUI", on page 43).
AP",
44