Establish A Remote Desktop Connection - R&S TSMA6 User Manual

®
R&S TSMA6
LAN
1. Connect the R&S TSMA6 LAN port with the host PC port.
2. Use the R&S TSMA6 default IP settings, that is, the DHCP Client. The
R&S TSMA6 and the remote host PC automatically negotiate the IP address.
3. Alternatively, use the fixed address. Start a web browser via the R&S TSMA6 Web-
GUI and enter the following URL:
http://TSMA6-<xxxxxx>.local (xxxxxx is the serial number of this specific
R&S TSMA6)
Local access from the R&S TSMA6 and Windows Explorer
► Open Internet Explorer using mouse, keyboard and monitor. The R&S TSMA6
Web-GUI open automatically. If not, type the following:
http://localhost

6.1.2 Establish a Remote Desktop Connection

To establish a remote desktop connection, the following steps must be performed:
1. A WLAN/LAN connection between the R&S TSMA6 and the remote PC has to be
established, see
2. On the external Windows PC, navigate to "Programs" > "Accessories" > "Remote
Desktop Connection".
3. In the "Remote Desktop Connection" window, click "Options".
4. In the "General" tab, enter following parameters:
●
●
User Manual 4900.8057.02 ─ 01
Chapter 6.1.1, "Start the R&S TSMA6
Computer: The input depends on selected connection type (see the
ter 6.1.1, "Start the R&S TSMA6
– WLAN: 192.168.137.1
– LAN: IP address of the R&S TSMA6
NOTE:
If you connect the R&S TSMA6 LAN interface with a PC via LAN cable, the
IP addresses are negotiated automatically by default. No fixed IP
addresses are assigned. In this case, you can add the device name in the
"LAN" field. This requires are working DNS service.
User name: instrument
Configuring the R&S TSMA6
Accessing the R&S TSMA6
Web-GUI",
Web-GUI", on page 24) and is as follows.
on page 24 .
Chap-
25