Selecting Measurement Mode; Measurement Modes - R&S TSMA6 Getting Started
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6:
- User manual (190 pages) ,
- Getting started (42 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
6. Enter the password 894129 and click "OK".
7. The remote desktop connection is established.
The R&S TSMA6 can be controlled by a standard Windows PC.
6.2
Selecting Measurement Mode
Select the measurement mode with the following steps.
1. Check the prerequisites of the desired measurement mode (see
"Measurement
these requirements.
2. Start the R&S TSMA6 web GUI (see
Web
GUI",
on page 28).
3. Select the measurement mode in the R&S TSMA6 web GUI, the modes are
described in
Chapter 6.3, "Measurement
6.3
Measurement Modes
The measurement modes can be configured via the radio button from the web
GUI under "Configuration" > "System" > "Mode".
Getting Started 4900.8040.02 ─ 07
Modes",
on page 31) and adjust your device according to
Configuring the R&S TSMA6
Chapter 6.1.1, "Start the R&S TSMA6
Modes",
on page 31.
Measurement Modes
Chapter 6.3,
31
Advertisement
Table of Contents
