Selecting Measurement Mode; Measurement Modes - R&S TSMA6 Series User Manual

®
R&S TSMA6

6.2 Selecting Measurement Mode

Select the measurement mode with the following steps.
1. Check the prerequisites of the desired measurement mode (see
"Measurement
requirements.
2. Start the R&S TSMA6 web GUI (see
GUI",
3. Select the measurement mode in the R&S TSMA6 web GUI, the modes are descri-
bed in

6.3 Measurement Modes

The measurement modes can be configured via the radio button from the web GUI
under "Configuration" > "System" > "Mode".
User Manual 4900.8057.02 ─ 06
Modes", on page 35) and adjust your device according to these
on page 32).
Chapter 6.3, "Measurement
Configuring the R&S TSMA6
Chapter 6.1.1, "Start the R&S TSMA6 Web
Modes", on page 35.
Measurement Modes
Chapter 6.3,
35