Web Gui Locally Not Accessible - R&S TSMA6 User Manual

®
R&S TSMA6
5. Check the IP address of the WLAN connection on your handheld device. It must be
in the subnet 192.168.137.xxx.
●
●
6. Check the WLAN settings, see
on page 46.

11.12 Web GUI locally not accessible

Open the web GUI locally. Start the Internet Explorer and enter the following URL to
open the R&S TSMA6 web GUI.
http://localhost
1. Check the URL in the browser dialog. Following URL must be displayed:
http://localhost/TSMA/Html/overview.php
●
●
User Manual 4900.8057.02 ─ 11
If the subnet is correct, continue with
accessible", on page 143.
If the subnet is not correct, try to reconnect. If it fails again, contact R&S sup-
port.
If the URL is not correct, enter the correct URL and reload the URL. If it fails
again, reinstall the firmware
general instructions", on page 84.
If the URL is correct and the following error status is displayed, continue with
step 2.

Web GUI locally not accessible

Chapter 11.12, "Web GUI locally not
Chapter 6.3, "Changing WLAN
Chapter 8.3, "Updating firmware/software/tools -
Troubleshooting
settings",
143