Table of Contents
Advertisement
Operation
4.27.16 Pneumatic pocket bag clamp: Loading from the left
The pneumatic pocket bag clamp makes it possible to load the pocket bag
from the left side. You can choose from 3 different processes within the
work cycle and select them in the Program parameters menu.
Fig. 66: Pneumatic pocket bag clamp
①
(1) - Pocket bag clamp
The setting for the mode of the pneumatic pocket bag clamp (1) is made
using the OP7000 control panel. Program parameters > Program
loading process ( p. 171).
Information
The setting for the downholder, pocket bag clamp (pneumatic) and waist-
band clamp - also in combination with downholder / vacuum - is made
using the OP7000 control panel. Program parameters > Program
loading process > Select downholder mode ( p. 171).
76
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Advertisement
Table of Contents
