Table of Contents
Advertisement
Operation
3. Press the right pedal forward and keep it there.
The left feeding device (10) opens.
4. Position the flap (8) at stops (9) and (19).
5. Release the right pedal.
The left feeding device (10) closes.
6. Press the right pedal back and keep it there.
The right feeding device (14) opens.
7. Align the pocket bag (15) with the positioning mark on the rest table (13).
8. Release the right pedal.
The right feeding device (14) closes.
9. Position the left jacket front part (3) with the dart (1) at the light spot (20).
10. Align the pocket incision at the middle knife incision (7).
11. Press the left pedal forward.
The vacuum is switched on and fixes the jacket front part in place.
12. Press the left pedal forward.
The pick-up folder (18) with the piping strip is lowered.
13. Press the left pedal forward.
The flap clamps close.
14. Press the left pedal forward.
The sewing process starts.
Positioning correction
To make positioning corrections:
1. Press the left pedal back.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
The piping strip is incised and picked up by the pick-up folder (18).
The transport carriage moves to the loading position.
The transport clamps are lowered.
The locking plates close.
The feeding device (10) with the flap (8) and the feeding device (14)
with the pocket bag (15) swivel in.
Feeding devices (10) and (14) open.
st
• 1
pedal tap: The flap clamps open
nd
• 2
pedal tap: The feeding devices swivel back
rd
• 3
pedal tap: The folding plates open, and the pick-up folder
swivels back to its initial position
th
• 4
pedal tap: The transport clamps lift
th
• 5
pedal tap: The transport carriage returns to its waiting position
83
Advertisement
Table of Contents
