Programming
Testing the light barriers
The display switches to Align light barriers.
Fig. 167: Testing the light barriers
Information
Refer to the Service Instructions for instructions on how to align
the light barriers with the help of templates.
For information on how to connect the light barriers, see the wiring
diagram included in the Appendix ( p. 353).
To test the light barriers:
1. Press the
Reference run is carried out.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
CAUTION
Risk of injury from moving parts!
Crushing possible.
Do NOT reach into the moving part of the machine.
button.
209