Table of Contents
Advertisement
USB logger
The display switches to USB logging.
Fig. 164: USB Logging
Symbol
To perform a OP7000 logging:
1. Create a Log.txt file on a computer.
2. Load the Log.txt file onto a USB key.
3. Plug the USB key with the Log.txt file into the USB port on the control
4. Confirm with OK.
OP7000 logging automatically writes all status messages of the
Information
The DAC logging is performed by DA service technicians only.
206
Description
DAC modes:
• for DA service technicians only
panel.
OP7000 to the Log.txt file until the machine is switched off.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming
Advertisement
Table of Contents
