Dürkopp Adler 755 B Operating Instructions Manual page 83

Operation
Sewing right jacket front parts
Fig. 71: Sewing pocket openings with flap in jacket front parts (2)
⑲
⑥
⑧
⑨
⑩
(1)
(2)
(6)
(7)
(8) - Flap
(9) - Flap stopper
(10) - Feeding device
(11) - Stop piping strip
(12) - Stop piping strip
To sew pocket openings with flap into right jacket front parts:
1. For a right jacket front part, position the piping strip (16) at stop (17).
2. Position the piping strip at stop (11).
3. Press the right pedal forward and keep it there.
 The left feeding device (10) opens.
4. Position the flap (8) at stops (9) and (19).
5. Release the right pedal.
 The left feeding device (10) closes.
6. Press the right pedal back and keep it there.
 The right feeding device (14) opens.
7. Align the pocket bag (15) with the positioning mark on the rest table (13).
8. Release the right pedal.
 The right feeding device (14) closes.
9. Position the right jacket front part (2) with the dart (1) at the light
10. Align the pocket incision at the middle knife incision (7).
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
⑱
⑳ ②
- Dart
- Right jacket front part
- Light spot seam beginning
- Light spot middle knife incision
spot (20).
⑦
① ⑪
(13) - Rest table
(14) - Feeding device
(15) - Pocket bag
(16) - Piping strip
(17) - Stop piping strip
(18) - Pick-up folder
(19) - Flap stopper
(20) - Light spot dart
⑰
⑯
⑮
⑭
⑬
⑫
81