Maintenance
3. Next, select Knife change position
The knives (2) extend with a clicking sound and can be seen at
Fig. 244: Replacing the incision knives for piping ends (1)
(1) - Piping strip rest table
Fig. 245: Replacing the incision knives for piping ends (2)
(2)
(3) - Tweezers
4. Loosen the screw (4) by a 1/4 turn while holding in place and removing
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
the piping strip rest table (1).
①
- Knife
the knife (2) with a pair of tweezers (3).
.
(2) - Knife
④
③
②
(4) - Screw (covered)
②
295