Table of Contents
Advertisement
Programming
Symbols
To set the securement of the right seam end:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Information
The settings in sub-item Securement seam end right needle
are adopted automatically from the settings for the Securement seam
end left needle ( p. 136).
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Meaning
Select stitch condensing
•
Adjust stitch length for stitch condensing at seam end
(0.5 - 4.5 mm)
•
Adjust number of stitches for stitch condensing at seam end
(0 - 10)
Select single tack
•
Adjust stitch length for single tack at seam end
(0.5 - 4.5 mm)
•
Adjust number of stitches for single tack at seam end
(0 - 10)
Select double tack
•
Adjust stitch length for double tack at seam end
(0.5 - 4.5 mm)
•
Adjust number of stitches for double tack at seam end
(0 - 10)
Adjusting securement seam end right needle
137
Advertisement
Table of Contents
