Table of Contents
Advertisement
Sewing right jacket front parts
Fig. 78: Sewing pocket openings with flap in jacket front parts (2)
(1) - Dart
(2) - right jacket front part
(5) - Light spot dart position
(6) - Light spot seam beginning
(7) - Light spot middle knife incision
To sew pocket openings with flap into right jacket front parts:
1. For a right jacket front part, position the piping strip (9) at stop (13).
2. Position the piping strip (9) at the lateral stop.
3. Press the right pedal back and keep it there.
The feeding device (12) for the pocket bag (11) opens.
4. Align the pocket bag (11) with the positioning mark on the rest table (10).
5. Release the right pedal.
The feeding device (12) closes.
6. Position the right jacket front part (2) with the dart (1) at the light spot (5).
7. Align the pocket incision at the light spot (7) (middle knife incision).
8. Press the left pedal forward.
The vacuum is switched on.
90
⑨
⑥
①
⑤
⑦
②
⑬
(9) - Piping strip
(10) - Rest table
(11) - Pocket bag
(12) - Feeding device
(13) - Stop
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation
⑫
⑪
⑩
Advertisement
Table of Contents
