Table of Contents
Advertisement
Programming
Middle knife parameters
The display switches to Middle knife parameters.
Fig. 122: Middle knife parameters
Symbols
To set the middle knife parameters:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Meaning
Middle knife On/Off
Adjust middle knife correction seam begin. p. 152
• -9.9 mm - 9.9 mm
Adjust middle knife correction seam end p. 152
• -9.9 mm - 9.9 mm
Automatic speed adjustment On/Off
• if automatic speed adjustment is enabled, the option Adjust
speed middle knife is not available
Adjust speed middle knife manually
• 100 RPM - 2000 RPM
• if this option is enabled, the option Automatic speed
adjustment On/Off is not available
Adjust middle knife position at insertion
• 0 mm - 30 mm
151
Advertisement
Table of Contents
