Programming
Corner knife (slanted pocket, automatic corner knife station)
Important
Before you can set the corner knife parameters for the slanted pocket,
you must select the option Straight/Slanted pocket or automatic corner
knife station in the submenu Corner knife device in the Machine
configuration ( p. 187). After making the conversion in the
Machine configuration, you must restart the machine.
The display switches to Corner knife (Slanted pocket).
Fig. 126: Corner knife (slanted pocket)
Symbols
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Meaning
All corner knives On/Off
Corner knife seam begin. left On/Off
Correction seam begin. left p. 156
• -9.9 mm - 9.9 mm
Correction seam begin. right p. 156
• -9.9 mm - 9.9 mm
Corner knife seam begin. right On/Off
Corner knife seam end left On/Off
155