Dürkopp Adler 755 B Operating Instructions Manual page 172

To select the piping type:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
The display switches to Spread transport clamp.
Fig. 139: Spreading the transport clamp
Symbols
To spread the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
170
Spreading the transport clamp
Meaning
Correction value left before corner cut
• -1.0 mm - 1.0 mm
Correction value right before corner cut
-1.0 mm - 1.0 mm
Spread transport clamp On/Off
Spread clamp left before transport start
• -1.0 mm - 1.0 mm
Spread clamp right before transport start
• -1.0 mm - 1.0 mm
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming