Table of Contents
Advertisement
Symbols
To create a seam program:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
134
Meaning
Securement seam end left/right needle
• Stitch condensing OR
• Single backtack OR
• Double backtack
Flap left
OR
Flap right
Adjust correction value of positioning point at seam
beginning p. 138
• -100 mm - 100 mm
Adjust correction value of positioning point in the middle of
the seam p. 138
• -100 mm - 100 mm
Adjust correction value of positioning point at seam end p. 138
• -100 mm - 100 mm
• The correction value will be adopted when you switch
positioning points
• The basic values for the positioning points seam beginning/
middle of the seam/seam end are set in the Global
parameters ( p. 198)
Adjust stitch length main seam
• 1.5 mm - 4.5 mm
Adjust flap scan p. 139
• Fixed seam length
• 1 light barrier
• Automatic flap scan left
Reset seam program
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming
Advertisement
Table of Contents
