Operation
To slide back the hood:
1. Switch off the machine.
2. Slide the hood (1) to the back.
You can now access the transport clamps.
3. Slide the hood (1) back to the front until it locks audibly into place.
Fig. 20: Sliding back the hood and removing the fabric sliding plate (2)
(2) - Fabric sliding plate
(3) - Pin
To disassemble the fabric sliding plate:
For machines with shims
1. Move the shims out of the throat plate area.
The transport clamp along with the shims moves out of the throat
2. Lift the fabric sliding plate (2) off the pin (3) and swing it out to the left.
3. Lift the fabric sliding plate (2) at the pin (4).
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
②
• Press back the pedal for more than 1 second OR
• Press the Shim
active in the software, p. 187)
plate area.
③
(4) - Pin
button on the start screen (only possible if
④
33