To adjust the transport clamps:
1. Press the desired button.
The user interface for setting the desired item is displayed.
The display switches to Return of transport clamp.
Fig. 133: Adjusting return of transport clamp
Symbols
164
Adjusting return of transport clamp
Meaning
Activate without transport
Adjust transport up to stacking position
•
1 mm - 100 mm
Activate transport up to loading position
• Not active unless the option has been activated in the Global
parameters p. 200
• The transport clamp automatically moves to the loading position
after sewing before returning to its waiting position
•
0 mm - 300 mm (set position of the loading position)
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming