15. Press the right pedal forward.
The vacuum is switched on to fix the jacket front part in place.
16. Press the left pedal forward.
The flap turning device swivels up and turns the flap (15).
17. Press the left pedal forward.
Holding the picked-up and incised piping strip, the pick-up folder (16)
18. Press the left pedal forward.
The feeding device (14) with the flap (15) swivels in.
19. Press the left pedal forward.
The sewing process starts.
Sewing left jacket front parts
Fig. 80: Sewing pocket openings with flap in jacket front parts (4)
(1) - Dart
(3) - Left jacket front part
(5) - Light spot dart position
(6) - Light spot seam end
(7) - Light spot middle knife incision
92
The feeding device (14) grasps the flap (15) and clamps it.
The transport carriage moves to the loading position.
The transport clamps are lowered.
swivels into the vertical position and lowers the jacket front part.
The folding plates close.
The feeding device (12) holding the pocket bag (11) swivels in.
The flap clamps on the transport clamps close.
⑨
③
⑦
①
⑤
⑥
(9) - Piping strip
(10) - Rest table
(11) - Pocket bag
(12) - Feeding device
(13) - Stop
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation
⑫
⑪
⑩
⑬