Dürkopp Adler 755 B Operating Instructions Manual page 109

Programming
Basic operation
The menu items of the software are numbered. For a quick overview, refer
to the table included in the chapter Software quick access ( p. 97).
Fig. 83: Basic operation
(1) - Pocket programs in sequence
(2) - Automatic seam sequence
(3) - Overview of seam sequences
(4) - Piece counter
(5) - Seam pattern
(6) - Positioning points
(7) - Quick selection corner knife correction
The control panel is controlled via a touch pad. The start screen is divided
into the areas below:
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
④
⑤
⑥ ⑦
No. Control panel
①
②
③
④
③
⑧
(8) - Info field
(9) - Toolbox
(10) - Help
(11) - User password
(12) - Service menu
(13) - Program parameters
Description
Display of pocket programs in
sequence
Automatic seam sequence
ON/OFF
Editing a seam sequence
Piece counter
② ①
⑬
⑫
⑪
⑨ ⑩
 p. 126
 p. 113
 p. 112
107