7.7.4 Table extension (right)
Fig. 267: Table extension (right) (1)
(1) - Screws
(2) - Table extension
To assemble the table extension (right):
1. Loosen the screws (3) of the valve block.
2. Remove cover (4).
3. Tighten the table extension (2) to the right side of the machine using
4. Fit the cover (4) and tighten it using the screws (3).
318
①
the screws (1).
③
①
(3) - Screws
(4) - Cover
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Setup
④
②
①