Fig. 260: Assembling the throw-over stacker (2)
(1) - Throw-over stacker
(2) - Mounting plate
To assemble the throw-over stacker:
1. Insert the tube (3) of the throw-over stacker (1) into the hole of
Fig. 261: Assembling the throw-over stacker (3)
(4) - Clamping piece
(5) - Nut
2. Adjust the height of the throw-over stacker:
314
①
②
③
the mounting plate (2).
④
minor adjustment - via nut (5) and threaded rod (6)
major adjustment - via clamping piece (4)
(3) - Tube
(6) - Threaded rod
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Setup
⑥
⑤