Programming
Adjusting needle thread-clamp/-catcher/-tension
The display switches to Needle thread-clamp/-catcher/
Fig. 160: Adjusting needle thread-clamp/-catcher/-tension
Symbol
To adjust the needle thread clamp, the needle thread catcher and
the needle thread tension:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
-tension.
Meaning
Adjust time: loosen needle thread clamp (seam beginning)
• 0 ms - 1000 ms
Adjust seam end: mm till thread clamp opens
• 0 mm - 100 mm
Adjust mm with needle thread catcher open
• 0 mm - 50 mm
201