Table of Contents
Advertisement
Fig. 81: Sewing pocket openings with flap in jacket front parts (5)
(1) - Dart
(6) - Light spot seam end
(14) - Feeding device
(15) - Flap
(16) - Pick-up folder
9. Press the left pedal forward.
The turning device (18) swivels into the alignment area and opens
10. Insert the flap (15) into the flap clamping bar.
11. Pull the rear edge of the flap (15) up to the light spot (6). Make sure
12. Press the left pedal forward.
The flap clamping bar closes and fixes the flap in place (15).
13. Press the right pedal backwards.
The vacuum is switched off.
14. Use both hands to manually align the jacket front part under the
94
⑥
①
⑭
⑮
the flap clamping bar, while the flap stopper (17) is lowered.
that the lateral edge of the flap (15) abuts on the flap stopper (17).
clamped flap (15) exactly as per the pattern.
(17) - Flap stopper
(18) - Turning device
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation
⑯
⑰
⑱
⑮
⑯
Advertisement
Table of Contents
