Table of Contents
Advertisement
11. Press the left pedal forward.
The vacuum is switched on and fixes the jacket front part in place.
12. Press the left pedal forward.
The pick-up folder (18) with the piping strip is lowered.
13. Press the left pedal forward.
The flap clamps close.
14. Press the left pedal forward.
The sewing process starts.
Sewing left jacket front parts
Fig. 72: Sewing pocket openings with flap in jacket front parts (3)
⑧
⑨
⑲
⑩
(1)
(3)
(6)
(7)
(8)
(9)
(10) - Feeding device
(11) - Stop piping strip
To sew pocket openings with flap into left jacket front parts:
1. For a left jacket front part, position the piping strip (16) at stop (12).
2. Position the piping strip at stop (11).
82
The piping strip is incised and picked up by the pick-up folder (18).
The transport carriage moves to the loading position.
The transport clamps are lowered.
The locking plates close.
The feeding device (10) with the flap (8) and the feeding device (14)
with the pocket bag (15) swivel in.
Feeding devices (10) and (14) open.
⑱
⑳
③
⑦
- Dart
- Left jacket front part
- Light spot seam end
- Light spot middle knife incision
- Flap
- Flap stopper
①
⑥
⑪
(12) - Stop piping strip
(13) - Rest table
(14) - Feeding device
(15) - Pocket bag
(16) - Piping strip
(18) - Pick-up folder
(19) - Flap stopper
(20) - Light spot dart
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation
⑰
⑯
⑮
⑭
⑬
⑫
Advertisement
Table of Contents
