Table of Contents
Advertisement
Programming
Updating the machine software
Information
There is a .zip file (9899_DAC001_000_A01.27_2016-02-14.jcbi)
containing
The update is performed in 2 steps.
The control panel OP7000 is updated first.
In a second step, a software update is performed for the control (DAC
comfort).
To perform an update of the machine software:
1. Download the update file from Dürkopp Adler's website.
2. Copy the update file to a blank Dürkopp Adler USB key (part
Fig. 234: Updating the machine software (1)
3. Switch off the machine and wait for approx. 15 seconds.
4. Connect the Dürkopp Adler USB key to the OP7000.
5. Restart the machine.
The OP7000 boot loader appears:
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
• the update file for the control panel
• the update file for the control
The file is named, for example:
9899_DAC001_000_A01.27_2016-02-14.jcbi
number 9835 301003).
285
Advertisement
Table of Contents
