Information
If the seam pattern is straight, you only have to set the left seam secure-
ment. The setting for the right needle is adopted.
Information
The settings in sub-item Securement seam beginning right
needle are adopted automatically from the settings for the Securement
seam beginning left needle ( p. 135).
The display switches to Securement seam end left needle.
Fig. 108: Adjusting securement seam end left needle
136
Adjusting securement seam beginning right needle
Adjusting securement seam end left needle
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming