Dürkopp Adler 755 B Operating Instructions Manual page 124

Naming a seam sequence
Fig. 96: Naming a seam sequence (1)
To enter a name for a seam sequence:
1. Press the button S02-S20 (depending on which seam sequence you
 The display switches to a keypad.
Fig. 97: Naming a seam sequence (2)
2. Enter the desired sequence name.
3. Confirm with OK.
122
have selected).
You can enter up to 18 characters.
Every sequence must be given a name.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming