Dürkopp Adler 755 B Operating Instructions Manual page 234

To test the piping knife:
1. Press the
 Reference run is carried out.
2. Press the desired button.
 The display switches to Adjust piping knife offset.
Fig. 186: Adjusting piping knife
Symbol
To adjust the piping knife:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
232
button.
Adjusting piping knife
Meaning
Correction of adjustment offset seam begin.
• -5.0 mm - 5.0 mm
Correction of adjustment offset seam end
• -5.0 mm - 5.0 mm
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming