Dürkopp Adler 755 B Operating Instructions Manual page 106

104
Menu item
5.2 Global parameters
5.2.1 Adjust positioning point seam begin./center/end
5.2.2 Adjust transport clamp
Lower transport clamp automatically On/Off
5.2.2.2 Clamp down: Time until next action
5.2.2.3 Speed to corner knife position
5.2.2.4 Speed to waiting position
5.2.2.6 Delay till clamp moves to seam begin.
Automatic transport clamp return On/Off
5.2.3 Adjust needle thread-clamp/-catcher/-tension
5.2.3.1 Time: Thread clamp open
5.2.3.2 Seam end: mm till thread clamp opens
5.2.3.3 mm with needle thread catcher open
Adjust corner knife distance
5.2.6 Adjust corner knife
5.2.6.1 Duration of corner knife On
5.2.7 Maximum hook thread counter
5.2.8 Adjust guiding plates and folder height
Needle thread monitor On/Off
Select flap clamp feeding mode
Transport clamp quick adjustment
5.2.11 Adjust machine process speed
5.2.18 Adjust password protection
Adjust counting direction of piece counter UP/DOWN
Knitwear mode On/Off
6.0 DAC internal
7.0 DAC update
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Programming
Option/described
on page
 p. 198
 p. 200
 p. 200
 p. 200
 p. 200
 p. 200
 p. 200
 p. 200
 p. 201
 p. 201
 p. 201
 p. 201
 p. 198
 p. 198
 p. 198
 p. 198
 p. 202
 p. 198
 p. 198
 p. 199
 p. 199
 p. 203
 p. 199
 p. 199
For DA staff only
 p. 254