Operation
Sewing pocket openings with or without flap in hind trousers
Fig. 73: Sewing pocket openings with or without flap in hind trousers (1)
(1) - Light spot
(2) - Light spot
(3) - Light spot
(4) - Pocket opening end
(5) - Positioning mark
Aligning the positioning aids
Hind trousers can be positioned according to 2 methods:
The preferred option is to align the end of the pocket opening (4) at
the rear light spot (2).
Position the hind trousers as close to the operator as possible. This allows
for the hind trousers - once positioned - to be safely smoothed out when
the transport clamps move forward.
To align the hind trousers symmetrically (positioning method a):
1. Align the light spot (10) such that it lines up exactly on top of the dart.
To align the hind trousers at positioning marks (5) and (9) (positioning
method B):
1. Position the right hind trousers.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
①
② ③
• Positioning method a: symmetrical at the central light spot (10)
• Positioning method b: at positioning marks (5) / (9)
⑩
⑨
⑧
④⑤
⑥
(6) - Positioning aid
(7) - Stop
(8) - Positioning aid
(9) - Positioning mark
(10) - Light spot
⑦
85