Removing The Try A/B Lift Motor (M13/M12) - Canon SADDLE FINISHER K3 Service Manual

6) Pull of fate tray B unit [8] upward.
1.3.4 Removing the Try A/B Lift
Motor (M13/M12)
1) Remove the tray A/B.
2) Move down the tray A/B unit to the bot-
tommost position (1.3.1). Otherwise,
the tray can drop along the rack when
the motor is removed.
3) Remove the screw [1], and detach the
motor driver PCB cover [2].
4) Disconnect the connector [3], and free
the harness from the cord clamp [4].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
F03-103-06
[1]
F03-103-07
[4]
F03-103-08
[8]
[2]
[3]
3-21