Adjusting The Position Of The Pressure Releasing Solenoid; (Sl73) - Canon SADDLE FINISHER K3 Service Manual

3.4.4 Adjusting the Position of the
Pressure Releasing Solenoid

(SL73)

1) Slide out the folder unit, and open the
left guide.
2) Remove the two screws [1], and detach
the left guide cover [2].
3) Remove the screw (front, rear; 1 each),
and detach the guide plate from the arm
[2].
4) Loosen the two adjusting screws [4] to
adjust the position of the pressure re-
leasing solenoid (SL73, [3]) so that the
value of A is 2 ± 0.3 mm when the sole-
noid goes ON.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[2]
[1]
F03-304-05
[2]
[2]
F03-304-06
F03-304-07
[1]
[3]
[4]
A
3-81