Canon SADDLE FINISHER K3 Service Manual page 257

4) Slide put the saddle unit to the front.
5) Remove the three screws [6], and detach
the stitcher base unit fixing plate (rear,
[7]).
6) Disconnect the two connectors [8].
7) Remove the three screws [9], and detach
the stitcher base unit cover [10].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[7]
[6]
[6]
F03-201-26
[9]
[8]
F03-201-27
[10]
[9]
3-55