Adjusting The Inlet Guide - Canon SADDLE FINISHER K3 Service Manual

3.3.2 Adjusting the Inlet Guide

1) Remove the front cover and the front
inside cover.
2) Loosen the two adjusting screws [1],
and loosen the adjusting screw to adjust
so that the tip of the inlet guide is 4 ±
1mm from the lower guide plate (not
the top of the rib).
3) Loosen the adjusting screw [3] to adjust
so that the upper guide plate is 4 ± 1
mm from the inlet guide when the inlet
solenoid (SL71; [2]) goes ON.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[1] [3] [1]
F03-303-06
[2]
3-73